高效液相色谱-质谱联用法测定薏苡仁药材中黄曲霉毒素

目的建立高效液相色谱-质谱联用法(high performance liquid chromatography-masss pectrometer,HPLC-MS)测定薏苡仁中药饮片中黄曲霉毒素B_1、B_2、G_1、G_2的方法,并对比不同产地薏苡仁中黄曲霉毒素含量。方法样品经过免疫亲合柱处理后,采用HPLC-MS进行测定。分析柱为C18柱(50 mm×2.1 mm, 1.8μm),流动相为10 mmol/L醋酸铵溶液-甲醇溶液,梯度洗脱,流速为0.3 mL/min,柱温为25℃。结果黄曲霉毒素B_1在0.26～10.4ng/mL浓度范围内与峰面积值均呈现良好的线性关系(r~2=0.9995),平均加样回收率为75.4%～123.9%,黄曲霉毒素B2在0.0875～3.5 ng/mL浓度范围内与峰面积值均呈现良好的线性关系(r~2=0.9996),平均加样回收率为71.1%～124.2%,黄曲霉毒素G_1在0.295～11.89 ng/mL浓度范围内与峰面积值均呈现良好的线性关系(r~2=0.9995),平均加样回收率为78.9%～112.2%,黄曲霉毒素G2在0.1475～5.9 ng/mL浓度范围内与峰面积值均呈现良好的线性关系(r~2=0.9992),平均加样回收率为73.8%～123.9%。结论该方法准确、可靠、专属性强,通过精确化合物离子监测,可准确的测定薏苡仁中黄曲霉毒素含量。     

基于ABAQUS的变截面橡胶密封条热应力与密封性分析

研究用于发动机油气分离器的乙烯丙烯酸酯橡胶密封胶条在不同温度下的强度和密封性能。借助于大型有限元分析软件ABAQUS建立橡胶密封胶条与配合壳体的有限元模型,采用Mooney-Rivlin模型,对不同温度下的密封胶条进行热应力计算分析,得到橡胶密封胶条在不同温度下的Von Mises应力、压缩率、接触应力和接触宽度。结果表明:随着温度的升高,密封胶条的Von Mises应力和密封胶条与壳体连续接触面上的接触应力逐渐增加,接触宽度基本不变,密封条的压缩率逐渐减小;密封胶条的Von Mises应力远小于橡胶材料的拉伸强度,满足强度要求;密封胶条连续接触面上的接触应力始终大于油气分离器的工作压力且接触宽度符合要求,橡胶密封胶条满足密封条件。     

面向数据流结构的指令映射优化方法

在高性能计算领域,数据流是一类重要的计算结构,也在很多实际场景表现出很好的性能和适用性。在数据流计算模式中,程序是以数据流图来表示的,数据流计算中一个关键的问题是如何将数据流图映射到多个执行单元上。通过分析现有数据流结构的指令映射方法及其不足,提出了基于数据流结构的新型指令映射优化方法。主要是根据多地址共享数据包的特性对指令映射方法进行优化,延迟多地址共享数据路由包的拆分,减少网络拥堵。     

玻璃纤维增强建筑用聚乙烯树脂复合材料的性能

采用剥离测试方法来表征制得的玻璃纤维增强建筑用聚乙烯树脂复合材料的界面黏结强度,并对其进行红外光谱、接触角、微观组织测试与分析。研究结果表明:采用浸润剂处理可以使玻璃表面生成新基团;浸润剂能够提高玻璃表面接触角,从而更易与树脂形成浸润状态,由此改善玻璃和树脂的界面结合状态,实现界面黏结特性的显著优化。在剥离测试中发现经浸润剂处理后,玻璃可以和树脂之间形成更强的界面结合作用;树脂从玻璃表面发生剥离之后,形成了光滑的玻璃片,同时还有部分纵横交错的划痕。     

Preparation of fused silica membrane with high performance for high temperature gas filtration by sealing and spray coating

In order to improve the gas permeability and thermal shock resistance of the ceramic membranes applied in high temperature gas-solid separation techniques, fused silica and graphite particles were used as the primary raw material and pore-former agent, and the spray coating based-on PVA sealing was applied to prepare the separation membrane. These approaches remarkably decreases filtration resistance by increasing support permeability and reducing the intrusion of ceramic membrane forming particles into the support as well as the thickness of the membrane. The fabricated membrane had an average pore diameter of 9.85?μm and a gas permeability value of 8.2?×?10⁴?m³/(m² h bar), its dust removal efficiency reached 98.6%.     

Critical current density and mechanical performance of MgB2 superconductors prepared with different magnesium sources

In this study, the critical current density and mechanical performance of MgB₂ superconductors prepared using different magnesium sources (Mg and MgH₂ with 99.9% and 96.5% purities, respectively) were analyzed. When the samples were characterized structurally and electrically, we found that the grain sizes were about 40?nm and transition temperature was around 30?K being lower than the literature. Critical current densities of all samples were calculated using Bean's model and our calculations yielded critical current density values higher than 10⁶?A?cm^?2 in self-field. The highest critical transition temperature value belongs to M800 (Mg with 99.9% purity) sample and when the critical current density and transition temperature values of this sample are considered, this sample appears to have the potential for practical use. Vicker's microhardness measurements were performed and yield stress (Y), elastic modulus (E), brittleness (B_i), ductility (D) and fracture toughness (K_IC) were calculated. All samples exhibited Indentation Size Effect (ISE) and microhardness measurements were compared with some microhardness models with were compatible with ISE behavior.     

The reliability of asset management regime of the SROH using air void content of asphalt mixtures

The comparison pairs of cores (each 100 mm apart) from 68 reinstatements sites from various parts of the UK revealed that, the compounding consequences of generic non-homogeneous characteristics of hand laid recipe mixed materials (specified in Specification for the Reinstatement of Openings in Highways (SROH)) and high likeliness of being biased during air void (AV) testing makes the coring method extremely unreliable with very low repeatability and reproducibility. The wide-ranging maximum density reported in every instance in the comparison pair coring experiments meaningfully rationalizes the distorted homogeneity of materials. Although not only maximum density but also bulk density of adjacent cores located only 100 mm apart were found to be varied in the case of every pair in this study. Furthermore, the in situ performance shown by from 50 reinstatements after experiencing 1.5–10 years real-life ageing from various parts of the UK predictably indicates that either the linkage between the reinstatement with non-compliant AV and its impact on footways durability is non-proven or the reported AV content is extremely over estimated. At 95% level of significance, there exists enough evidence to conclude that, due to high uncertainty, very low repeatability and reproducibility and poor reliability with high chances of bias, the assessment of hand laid reinstatement work by AV testing will expose both the contractor and the client to unacceptable risk.     

Improving room-temperature electrochemical performance of solid-state lithium battery by using electrospun La2Zr2O7 fibers-filled composite solid electrolyte

Low ionic conductivity at room temperature and poor interfacial compatibility are the main obstacles to restrain the practical application of polymer solid electrolytes. In this work, lanthanum zirconate (LZO) fibers were prepared by electrospinning method and used for the first time as fillers in sandwich polypropylene carbonate (PPC)-based solid electrolyte. Meanwhile, a graphite coating was applied on one surface of the composite solid electrolyte (CSE) membrane. The results show that the LZO fibers significantly increases the room-temperature electrochemical performance of the CSE, and the graphite coating enhances the interfacial compatibility between electrolyte and lithium anode. Furthermore, an ultra-thin PPC-LZO CSE with a total thickness of 22 μm was prepared and used in NCM622/CSE/Li solid-state cell, which shows an initial discharge capacity of 165.6 mAh/g at the current density of 0.5C and a remaining capacity of 113.0 mAh/g after 250 cycles at room temperature. Rise to 1C, the cell shows an initial discharge capacity of 154.2 mAh/g with a remaining capacity of 95.6 mAh/g after 250 cycles. This ultra-thin CSE is expected to be widely applied in high energy-density solid-state battery with excellent room-temperature electrochemical performances.     

Observer-based prescribed performance attitude control for flexible spacecraft with actuator saturation

This paper investigates the prescribed performance attitude control problem for flexible spacecraft subject to external disturbances and actuator constraints. By using a new performance function and an error transformation, the attitude control system is transformed into an error system which will be kept bounded to ensure expected dynamic and steady-state responses. Compared with the commonly used performance function, the modified one has an explicit prespecified terminal time which determines the maximum convergence time of the attitude control system. A modal observer and a disturbance observer are designed to deal with the flexible vibration and disturbances, respectively. Furthermore, when considering actuator saturation, an improved control strategy is developed with an auxiliary system utilized to compensate the saturation. The stability of the closed-loop system is analyzed by Lyapunov theory. Simulation results show the effectiveness and performance of the proposed methods.     

组合轮径差对地铁车辆动力学性能的影响

为了研究各种轮径差组合形式对地铁车辆动力学性能的影响,基于车辆系统动力学和赫兹非线性接触理论,建立地铁动车非线性动力学模型,分析各种轮径差组合工况下地铁车辆的临界速度、平稳性、安全性和磨耗功率及其变化规律。结果表明:在多种轮径差组合工况下,轮径差增大会使地铁车辆的临界速度有较大幅度降低,会使地铁车辆的横向平稳性和磨耗功率明显增大;轮径差对地铁车辆的垂向平稳性、轮轴横向力、轮轨垂向力、脱轨系数和轮重减载率影响较小;通过左、右曲线时,轮径差对磨耗功率增幅的影响存在差异,但变化规律一致。